:	Aug 9, 2004

: It is imperative that before any work is undertaken on the SRS system, the appropriate information is read thoroughly.

: Always disconnect both battery cables before beginning work on the SRS system. Disconnect the ground cable first. Never reverse connect the battery.

.

Disconnect the battery ground cable.

.

Make the SRS system safe.

.

Remove the front seat.

.

Remove the seat backrest hinge cover.   Remove the 2 screws.

.

Remove the front safety belt buckle.   Remove the Torx bolt.   Disconnect the 2 electrical connectors.   Release the wiring harness.

.

Install the front safety belt buckle.   Tighten the Torx bolt to 40 Nm (30 lb.ft).   Connect the electrical connectors.   Attach the wiring harness.

.

Install the seat backrest hinge cover.   Tighten the screws.

.

Install the front seat.

.

Connect the battery ground cable.